Red Dot Coordinates Detection

I'm trying to follow movement of a part using red dots. I tried with white dots and thresholding before, but there is too much reflection from the smartphone I'm using. The plan is

Solution 1:

The problem was the wrong color range. Because of this, there were holes in the mask of the circles. Due to division by zero. M00. You can choose the correct color range or pre-fill the holes in the mask. Or use this code:

import cv2
import numpy as np
#load image
img = cv2.imread('ZayrMep.jpg')

#apply median blur, 15 means it's smoothing image 15x15 pixels
blur = cv2.medianBlur(img,15)

#convert to hsv
hsv = cv2.cvtColor(blur, cv2.COLOR_BGR2HSV)

#color definition
red_lower = np.array([160,210,230])
red_upper = np.array([180,255,255])

#red color mask (sort of thresholding, actually segmentation)
mask = cv2.inRange(hsv, red_lower, red_upper)

connectivity = 4  
# Perform the operation
output = cv2.connectedComponentsWithStats(mask, connectivity, cv2.CV_32S)
# Get the results

num_labels = output[0]-1

centroids = output[3][1:]
#print results
print ('number of dots, should be 4:',num_labels )
print ('array of dot center coordinates:',centroids)

Solution 2:

moments00 (area) can be 0 for some shapes according to cv documentation. This is probably what is happening here:

Note Since the contour moments are computed using Green formula, you may get seemingly odd results for contours with self-intersections, e.g. a zero area (m00) for butterfly-shaped contours.

From: https://docs.opencv.org/3.4/d8/d23/classcv_1_1Moments.html#a8b1b4917d1123abc3a3c16b007a7319b

You need to ensure the area (m00) is not 0 before using it for division.